By Ali Hassan, Editor, UAE · Updated 11 November 2026

Preparing for On-Site Hard Drive Shredding Visit: Steps

An on-site shredding visit is quick if you prepare, and slow, awkward and expensive if you don’t. The vehicle doesn’t wait while someone hunts for a lift key or unscrews dozens of drives from caddies. This guide covers preparing for an on-site hard drive shredding visit at a Dubai or Sharjah office.

Quick answer: Before the visit, extract drives from hosts and caddies, export serial numbers, tray the drives in numbered batches, book bay and lift access, and name two people to witness and sign off.

Preparing for on-site hard drive shredding visit: your timeline

WhenTaskOwner
1 week beforeConfirm drive count, particle size and certificate formatIT lead
1 week beforeBook loading bay, lift and building accessFacilities
3 days beforeExport the asset list with serial numbersIT
1 to 2 days beforeExport the asset list with serial numbersIT
Visit dayEscort, scan serials, witness shredding, sign offFile the certificate and reconcile the list
After the visitFile the certificate and reconcile the listIT

Extract drives from hosts and caddies

  • Get change approval before pulling anything, and make sure data you need is backed up.
  • Pull drives from servers, SAN and NAS arrays, desktops and laptops. Don’t forget M.2 SSDs and drives inside multifunction printers.
  • Record each drive’s host and bay on the tray log. It helps reconciliation later.
  • Removing drives from caddies: shredders generally take bare drives, so unscrew them. Keep the caddies. Genuine server caddies have resale value, as we explain in our HPE server selling guide (https://www.mahrecycling.ae/blog/selling-used-hpe-proliant-dl-ml-servers-dubai/).
  • Storage that’s soldered to a board, as in some laptops and tablets, can’t be removed. Tell the vendor so those devices are handled whole.

Serial scanning before shredding

Scanning, not shredding, is usually the slowest step. Speed it up:

  • Export serials from your asset register, or from iDRAC or iLO using our CLI cheat sheet (https://www.mahrecycling.ae/blog/exporting-server-switch-hardware-specs-idrac-ilo-cli/).
  • Wipe dust off labels and place drives label-up in numbered trays of equal size.
  • Photograph any label that won’t scan.
  • Flag extra or missing drives on site, not afterwards.

On-site shredding space and power requirements

Requirements differ by provider and machine, so ask in writing:

  • Vehicle length, width and height, and the clearance it needs.
  • Whether the unit runs on its own power or needs a mains connection.
  • How long it will be parked, and where.
  • Noise, and any restrictions on timing.
  • Where the vehicle will be during the visit, and how drives travel to it.

In Dubai and Sharjah, many towers and free zones also require bay booking, building management approval, an insurance certificate or visitor passes. Ask your property team early.

Loading bay clearance and route

  • Reserve the bay for the full visit window.
  • Check the route from the media room to the bay, including lifts and door widths.
  • Keep trays on a trolley, with a locked room for staging.
  • Brief security so the vendor team isn’t stopped at the gate.

Witness sign-off

  • Nominate two people, for example IT and security or facilities.
  • Check tray counts against the serial list before shredding starts.
  • Watch drives go into the shredder.
  • Ask what particle size the shredder produces and which standard it maps to.
  • Sign the sheet with date, time, count and names.
  • Confirm the certificate lists serial numbers, and that you receive it afterwards.

Destruction should follow your policy and NIST SP 800-88 Rev. 2. See also IEEE 2883 vs NIST 800-88 vs DoD (https://www.mahrecycling.ae/blog/ieee-2883-vs-nist-800-88-vs-dod-5220-22-m/) for what to write into the policy.